When it comes to stain the deck, homeowners have many different choices in the type of stain. One can choose from transparent stain types, semi-transparent, solid, and semi-solid stain types. Each stain type has its own characteristics. For example, transparent stain will actuallyStaining, Sealing and Maintaining Your Deck soak into the deck boards. On the other hand, solid stain acts more like a pain as it rests on the top of the deck board. How often should you stain or seal your deck mainly depends on the type of stain you use and many other factors.

Type of Deck Stains and Sealers:

As a golden rule, the newer the deck, the more transparent the stain you need to choose. People generally don’t use high-pigmented solid stain when it comes to seal or stain a new deck. The reason behind is that people love the color and look of the wood that the deck is made of. However, the rule is that the more transparent the stain will be the faster the deck will wear and it will need to be re-stained more often. On the other hand, if you stain the deck with a solid stain, you will need to re-stain the deck less often. But in that case, you will actually have to cover the natural beauty of the wood deck. On an average a transparent stain will required to be re-stained or re-sealed every year. On the other hand, solid pigmented deck will usually need to be re-stained in every five years.

Sealing the Deck:

If you seal the wood deck with UV protected weather proof water seal twice a year, you will not need to stain the deck more often. According to the professional painters, sealing your deck with a good quality water sealer actually doubles the time between re-staining. Sealing offers humid weather protection and at the same time protects wood deck from UV rays of the sun. A good quality sealer also creates a shield that protects the deck from direct sunlight and avoids potential damages caused by the sunlight.

Weather Conditions:

If the deck is exposed to harsh weather conditions like humidity, sunlight, and snowfall, it will start to wear more frequently and you will need to stain the deck in no time. Wood deck that is regularly exposed to dry and humid weather condition may need to be stained and sealed more often to keep up with the weathering process.

A high quality exterior paint job can greatly progress the curb appeal of your home. A home with excellent exterior finish can grab the attention of your neighbor. At the same time, a home with poor exterior can become a neighborhood eyesore. An exterior paint job may cost a lot. Therefore, no homeowner wants to repaint the exterior of their house too often. The best way to avoid repainting the exterior of your house too often is to have proper knowledge about exterior painting techniques and maintenance. A good paint job may last for years, while a poorly done exterior paint job can force you to repaint your house in just a couple of years. However, knowing how to prepare your surface properly before applying paint and proper maintenance for the painted surface afterward can extend the life of the paint job significantly.

Good Preparation:

Preparation is the key to achieving a long-lasting exterior paint job. If you apply paint on dirty, greasy, chalky exterior surfaces, this will surely weaken the paint’s ability to adhere to the surface. If you don’t prepare the surface properly, paint will properly adhere to the surface and you will receive a uneven paint job, that will be prone to chipping and flaking in the long run. No matter whether you are a DIY painter or hiring a professional exterior painting contractor, you should make sure that proper preparation is done to the surface.

Kind Of Paint You Use:

The longevity of the paint job may also depend on the kind of paint you are using. Typically, acrylic latex paint is considered the idea choice for most exterior painting. Acrylic latex paint is also considered the most versatile since they can be used on both water or oil based primers. Acrylic paint doesn’t harden over time, this can help avoid blistering. Acrylic paint doesn’t even mildew as easily as oil-based paints.

Use Primer:

Priming also helps the exterior paint job lasts long days. Unless the old paint on your home’s exterior is still in the good condition, you should apply high quality primer beneath the color top coats. Priming is especially important for new and previously unpainted areas. Primer is necessary since it actually works as a base coat. It also helps remove any surface imperfections and increases the chances of paint adhesion, actually making the paint to avoid chipping, bubbling, and flaking. You can use oil or water based primer when you are using acrylic latex based paint.

When it comes to paint the interior or exterior of your house it’s not always the best idea to select the lowest cost estimate since there are potential risks in selecting cheap paint job. Actually, there are always huge differences between interior painters who are efficient in doing their job and those who just want to cut corners by giving a cheap estimate. You should always be aware of the cheap paint estimate since there is a huge list of common scams, short cuts, runarounds and price gauging that come with some painters. Mentioned below are some of the most important areas where some low cost interior painters cheat.

Wall Repair:

This is the most common area where interior painters can easily cut short to save time. Typically, most paint contracts don’t state the extent of wall repairs that will be included in the paint job. Therefore, it’s up to the painter’s will how much they will do. In case you interior walls require too much repair, they will usually point out the repairs but don’t include it in the estimate. Sometimes, they will ask you if you would like it fixed after they start your paint project and then let you know how much more it will cost.

Paint Prices:

Paint may be more expensive as you go from flat to gloss. The paint cost varies according to its quality, sheen and brand. The difference is always around $1 per gallon per sheen upgrade. Usually, flat paint is the cheapest, then comes the matt finish or eggshell, satin, semi-gloss and high-gloss paint. Furthermore, paint can get more expensive that darker it gets. This is where the dishonest painting contractor cheats the consumer. They make you deposit the amount for paint and let you pick the colors a couple of days before the project starts. If the painter goes to the store and finds out they are deep base, they are going to charge you more for the paint. Apart from that, in such cases, the primer coat is likely to be very expensive. To get rid of this problem, you need to make sure that the finishes and paints are on the contract before signing.

Paint Coverage:

There is another reason why you should not blindly choose a low cost paint estimate i.e. paint coverage. If the paint job is almost done and the painting contractor feels that your walls need another coat and it’s not in the contract, it will surely be very expensive third coat.

It is a good idea to use pressure washer on an old home before applying paint on its surface. However, it is not as simple as people might take it. There is no doubt that it is a great way to clean dirty siding and many painting contractors use it as a way to prep surfaces for new paint. Nevertheless, if not done professionally, pressure washing can cause more harm than good. If not done properly, it can damage to the wood or older soft masonry structure. It may even force water into the structure of your existing house, which may be harmful. Therefore, it is important to be careful while pressure washing your old house.

Mentioned below is a quick guide on how to carefully use pressure washer. This guide will help you prevent any potential damages to your house when using pressure washer.

Don’t Get Too Close:

The number one problem with pressure washing is that people often get too close when using the pressure the washer. In fact, people put the nozzle right against the surface to get rid of those sticky dirt and stains. As a result, this digs out certain portions of the wood and mortar and ultimately, damages a perfectly good siding. The best way to do pressure wash is to keep the washer at least 1 foot away from the surface always.

Use a Lower Strength Washer:

There are many high capacity pressure washers that create a very powerful effect on an old wood house. They may be ideal for cleaning driveways, but they will surely blast right through wood siding, more specifically when there is any wood rot. This is the reason why you need to use a slightly lower strength pressure washer. By this ways, even if you slip up a little, it won’t cause nearly as much damage as the powerful pressure washers do.

Keep the Steam Wide:

Most pressure washers are made with an adjustable nozzle that allows you to make the stream of water go from a wide stream. This is better than a single jet stream of water since the single stream can dig a hole through the wood surface.

Keep Good Aim:

It is also important to keep a good aim while using the pressure washer. If you are not careful about aiming the pressure washer, the highly pressurized water can hit the clapboards and shingles and into the walls. The best way is to aim your pressure washer downward while using it on the siding.

Selecting the correct brushes and rollers is an important step in making your paint jobs look better. Correct paint equipment’s help you do the tasks more easily and efficiently. In fact, high quality painting equipment’s like brushes and rollers are important when you need a consistent, long-lasting finish. Typically, better quality brushes and rollers are likely to apply a thicker, long-lasting, and uniform coat of paint than paint applied by using cheap quality paint brushes and rollers. High quality paint equipment’s also speed up the project and simplify your work.

In most cases, the tools you require will actually depend on the type of paint project you are handling and the type of paint you wish to apply. Mentioned below are some of the most important guidelines for any good paint job.

Types of Paint Brushes:

Professional painting contractors mainly use two types of paint brushes: one that is made of natural hair bristles and those that are made of synthetic materials, such as nylon and polyester. Both natural hair bristle and synthetic paint brushes are good for using on a painting project where you are using alkyd or oil-based paints and finishes. However, top quality natural hair bristle paint brushes are ideal for working with enamels or any topcoats.

It is also recommended to use only synthetic brushes, when you are working with any type of latex based paint. These types of brushes usually hold their shape and maintain proper firmness, no matter how much water they are exposed to. Good quality polyester brushes, on the other hand, are mainly used because of their affordable cost. Once you properly clean and store, polyester paint brushes will last long and you can use them to apply paint evenly and uniformly for the years to come.

Selecting Paint Rollers:

Paint rollers are often used for paint projects because of their seamless nature. They are faster and easier to use than any types of paint brushes. Paint rollers are more effective when working on walls, ceilings, and other surfaces that are large or flat. Paint rollers are also excellent for applying paint on exterior surfaces like stucco and concrete. Just like paint brushes, it is important to purchase high quality roller covers.

However, there are few cases when rollers are not recommended. For example, rollers are difficult to use in tiny and narrow places. When working with small and narrow spaces, one should need to buy many different sizes of paint rollers and a couple of paint brushes.

An exterior painting project involves more than we see in open eyes. For every hour that you spent in applying paint, an hour was likely spent in preparing the surface. Surface preparation is the key to a successful exterior paint job. If you neglect the surface preparation job, it can make maintenance much more difficult than it needs to be.

Over time, the extreme sunlight and temperature can take toll on exterior surfaces that are not prepared well. However, exterior surface preparation can make an exterior painting of house last many years.

Why Surface Preparation is Important?

Surface preparation helps in achieving a high bond strength, durability, and lifespan in any paint job. Different surfaces will require different methods of surface preparation. For example, sometimes you will require just brushing away the dust from the exterior surface of your house, while in other cases you may require more complicated surface preparation process prior to apply the paint. Mentioned below are some of the important steps to follow while preparing the surface for an exterior paint job.

Filling and Patching:

Before you apply paint of the exterior surface of your house, you should remove and replace any rotten or decaying timber. You need to fix all holes and cracks in the exterior surfaces by using good quality filler. It is important to apply filler with a putty knife. You should overfill the holes to compensate for shrinkage when it sets. If the movement is likely to occur, you can use flexible exterior grade filler.

Masonry and Brick:

The masonry and brick of the exterior surface of your house should also be prepped well. Scrape away any loose paint from the masonry and brick wall. It is also important to fill the holes with high quality masonry filler by using a broad knife or scraper. You also need to roughen the filler before it completely dries by using a brush. This helps to match the texture of the surrounding exterior surface. If you get a large hole to fill, it is wise to hire the professionals.

Exterior Sanding:

If the paintwork of the exterior of your house is in good condition, you don’t need to spend lot of time for the prep work. For the surface that has newer paintwork, only a light sanding will be enough. By sanding the surface, you can fix any small areas of peeling or cracking. However, all larger holes and cracks need to be properly filled and primed. In case you are working with a painted brick or masonry, it is important to power-wash the surface by using a high-pressure cleaner.

Keeping your windows properly caulked and glazed is the best way to make sure you are utilizing energy efficiency. Caulk is actually a flexible material which is used to seal air leaks through crack, gaps, or joints. However, you can use weather-stripping for components that move like doors and operable windows. Caulking can actually reduce heating and cooling costs and can improve ease at your home. Therefore, it actually saves energy. Mentioned below are some of the most important points that you need to follow while caulking and glazing windows.

Prepare the Area to Be Caulked:

Before applying the new caulk, it is important to remove the old caulk solution depending on your air leaks. You can do this simply by taking a even headed screw driver and comfortably pry up the old solution and peel it away.

Prepare Both the Eco-Caulking Solution and Caulking Gun:

Another important thing is to take your eco-caulk as well as the scissors and cut the tip of the caulking solution at a forty-five degree angle. This is required since it helps to ensure that the caulking solution applies evenly. You can fill the container into your caulking gun, once the caulking solution is properly prepared.

Lay a Thin Bead of Eco-Caulk Over the Air Leak:

Once the air leak is prepped and the caulking gun is loaded with eco-caulking solution, you are all set to seal your air leak. What you need to do is to very easily take the caulking gun and grip it at a forty-five degree angle at the top of the air leak. After that, apply pressure on the trigger of caulking gun to release the
caulking solution.

Smooth Out and Remove Any Additional Caulk:

Once the all thing is done, you can take your finger and even out the caulking solution till it comes out as one uninterrupted bead. Once it is done, you can take your wet rag and remove any excess caulk from your door and window frame.

By now your doors are properly sealed and your home is more comfortable and energy efficient. Typically, the caulking solution may take around 24 hours to set and dry fully. At this point, you can add extra touch up paint whenever required.
By properly caulking and glazing your indoor windows throughout your home, you could surely see a decrease in your heating and cooling bills by as much as 20%. If you want to look for more ways to make your home more energy efficient, you can check out for high quality caulks.

There is a best season for everything, and the best season for painting the exterior of your house is definitely not the winter, unless you live in a moderate climate. The best season to do your exterior painting is during the warmer months and it is also important to choose a good day for the job. Exterior painting on the wrong seasons may lead to various problems such as flaking paint, runs, cracks and bubbles.

Painting the exterior of your house is best done in the fall when there is moderate temperature, and the weather is not too hot or too cold. Typically the best temperature range for painting exterior with any type of paint is from 50 degree to 85 degree Fahrenheit. However, painting during the high summer months can cause paint to dry too quickly, which may result in brush marks and clumps of paint on the paintbrush. On the other hand, painting in tool cold season can cause the paint to not adhere well to the exterior surface, which may results in cracking and peeling.

The Best Season for Exterior Painting:

Basically the best season to paint the exterior of your house depends on your local conditions. For e.g. if you live the Northern climatic zone where it’s too familiar to get snow, it’s the best to wait until the end of spring to paint to provide your exterior with enough time to dry out properly. Summer could be a good time to paint the exterior of your house, but it can also bring wind, and painting in windy climate is virtually impossible. Wind carries overspray from your paint sprayer here and there and pollutes the already painted surfaces with dirt.

Ideal Weather Conditions for Exterior Painting:

When you are planning to start an exterior house painting project, you need to check the weather report on a daily basis. Ideally, the best day for exterior painting is on the day when the temperature is likely to remain fairly warm. A temperature range is between 50 and 85 degree Fahrenheit is ideal for painting the exterior of your house. However, if you are working with oil based paint, you will get good result in a temperature range between 40 and 90 degrees Fahrenheit. Make sure there is little to no wind in the weather forecast. Also keep in mind that sunlight can warm the painted surface and cause cracking. Therefore, a partly cloudy weather is better than a sunny day to paint the exterior of your house.

Interior wood shutters often take a lot of abuses from the environment. After a couple of years, this can cause the wood in shutters to damage or the joints in the shutter frame to come apart. With the new technologies and brand new products on the air, it’s not a difficult task to salvage your old wood shutter.

Repainting is the easiest and inexpensive way to refresh the old wood shutters and give it a new look. Here is how to do it.

Pick a Color:

Choosing the right paint color for your living place is the most important step to painting your shutters. The most typical approach is to match your shutters to the roof color. If you have applied dark gray or black color on your roof, then black shutters will most likely look the best. On the other hand, if you have brown roof, then you should choose dark brown shades for your shutters. However, if you have small windows in your home, you need to choose a lighter color that blends with the house color.

Pick the Right Quality Paint:

The next step is to choose the best quality paint since it is important to salvage the old wood shutters. The material of you shutters plays an important role in selecting the best type of paint for the job. For example, if you have vinyl shutters, you should choose acrylic paint that contains urethane resins. Similarly, good quality exterior latex paint works the best with wood shutters.

Prepare Your Work Area:

A good workspace ensures that your shutters are protected from wind gusts. This is the reason why you need to prepare the work area outside in the shade. It is also important to lay a piece of cloth under your work area to avoid staining plants, grass, patio or the garage. You can remove the shutters from windows for repainting once the workspace is ready.

Prepare the Surface:

In order to prepare the surface well, remove all the existing paints with a paint scraper. In case you are not able to remove all existing paint with the scraper, use a paint stripper. Always choose a paint stripper that works the best with the material of the shutter. Apply a light coat of liquid paint stripper to the shutters with a paintbrush. Wait 30 to 40 minutes to let the paint stripper work on the old paint. Finally scrape the surface once again.

Priming and Painting:

Priming is essential so the paint will adhere well to the surface of the old shutters. You should apply a minimum of two coats and allow plenty of dry time between each coat.

The entrance of your house is the first thing that people notice when they come by, so there is no harm in making your home stand out from the rest by applying a fresh coat of paint to your front door. Your front door can actually make a huge impact on the beauty and curb appeal of the entire home. Mentioned below are some insights about what paint colors will give your front door the best look.

Red – A Classic Fire Engine Shade:

The classic shade like red can always give your front door a special look. A bold hue like red looks great with homes painted in white, blue, and grey. You can even try red in a high gloss finish to make it extra eye catching.

Indigo – A Soothing Shade:

You will surely love how a soothing color like indigo will change the shades and look totally different from the morning to night. Indigo can provide your front door with a dramatic and cool effect that you will love forever. Indigo when paired with bright white trim will also make your front door stand out from the rest.

Orange – The Bold Look:

You can give your front door as well as the entire home a bold look just by applying orange on it. Nothing makes a bold but quite statement like orange. Orange is the best color to grab the attention of a potential visitor and it will draw people right inside your home. Orange looks more charming on a dark charcoal backdrop, which creates a more vibrant effect.

Black – A Stand-Out Color:

Many people avoid black when it comes to paint their front door. However, the truth is that a freshly-painted black door looks great with just about every exterior and style of a home. A black door commands attention and makes your house unique in your neighborhood.

Lime-Green – The Show Stopper:

People will surely love to look twice when they pass a home that is painted in a show stopper color like lime-green. However, many people don’t use lime-green as it won’t work for every exterior style and color. But it looks significantly dashing with exteriors painted in brown, grey, or raisin paint colors.

Yellow – For a Refreshing Look:

If you want to rejuvenate the tired-looking appearance of your house, you can go for a bright yellow or marigold. In fact, there are very few colors that can make you happier that a refreshing yellow does.