If you are thinking to spend on home remodeling project, there are enough chances that you have at least one window that needs to be glazed. Today, it is very common to find windows with glazing that incorporate multiple panes of glass, gas fillings, and high-class and sensitive Glaze-Your-Windowscoatings.

Glazing is actually a kind of hard putty that creates a weather-tight seal on the exterior of the window between the wood and the glass. Over the time it can become loose or badly cracked. This protects your window from hard weather condition such as storm, rain water and ice. If this is the situation, you always have an option to re-glaze you’re your window.

Re-glazing is not difficult; all you need to do is a little know-how and a couple of free hours.

Inspect the Situation:

You should examine the exterior of your windows in order to check what situation they are in. If you find that there are few small cracks here and there, there is some life left to it. However, it is vital to check regularly to see if things get any worse. If you find any glazing missing, or if your window cracks are wide enough to fit a knife blade, you need to glaze your windows immediately.

Remove Operable Window Part:

Once you have decided to reglaze your window, you need to remove the operable part of your window – the parts where it slides up or down. You can take out all tall, lean pieces of wood (stops) that are placed on the inner portion of the window to each side of the opening. The may be held in place with screws, so you need to remove the screws as well. Use a razor knife to remove the paint line or putty in order to remove the stops. If you are working with an old window which is painted in lead paint, you should take all necessary precautions.

Remove Old Glazing:

Once you have removed all operable parts, it’s time to remove all bad glazing. You can take a sharp razor knife or similar object to chip off the loose glazing. You should take the putty off very carefully with a delicate touch. If you do it wrong, you may break the window or damage the wood frame. The best way is to use a heat gun that actually softens the glazing to a particular extent and the glazing will fall off window.

Low VOC paints are type of paints that contain volatile organic compounds at the lowest level.The safe level of VOC should be fifty grams per liter and below. If the paint contains VOC this stated level, the paint is considered hazardous to both your health and the environment. VolatileLow VOC Paints organic compound has significant vapor pressures that are dangerous to the environment as well as the health of people.

However, the regulated VOCs are those of the anthropogenic type.

Expert’s Choice:

Low VOC paints are approved by the experts since they have many benefits. Today, you can find many different low VOC paints that not only combine aesthetic and functionality, but also protect the environment in order to create a beautiful color for your interior walls.

Popular Choice for Paint Job:

Low VOC paints are quickly becoming a must choice for major household since homeowners are now looking for more environmentally friendly paints. Low VOC paints also act in the same way as the traditional house paints do. Like the traditional paint, low VOC paints also provide the same amount of rich color pigmentation, as well as durability. However, since these paints have fifty gram/liter or less volatile organic compounds, they are considered the safer and greener alternative for the traditional interior and exterior painting available in the market.

Easy Availability:

Finding low VOC paints is not so difficult. There are so many reputed paint brands that offer low VOC paints for the customers. However, while choosing a particular brand, please ask the painting manufacturers to display their technical data sheet to check the details how safe and environmentally friendly their paint really is.

Safe for Health:

Choosing low VOC paints actually help you protect your home as well as family from the potential health risks that are related with constant exposure to high VOC paints. Actually the high VOC paints on the wall will start to release the harmful toxins over a period of time. However, with low VOC paints there is no such problem.

A Green Choice:

For most homeowners, it has become the most important to for green paints. Furthermore, it has become more popular among the interior designers who give their time to interior color schemes. However, by using low VOC paint, you can use green elements on interior walls of your house in order to enhance room’s aesthetic beauty and provide you with a natural and organic look.

Furthermore, by using environmentally-friendly products like low VOC paints, the consumers can go green while maintaining the ability to select even the most important array of colors.

Aluminum and vinyl siding has been installed on many houses in the past couple of decades. And, painting aluminum and vinyl siding is a frequently asked project among the homeowners. Aluminum and vinyl siding can be considered a cheaper alternative to traditional finish products. They are available in all price ranges and have proven to be an excellent choice for many situations. However, what most home Paints for Aluminum and Vinyl Siding:owners ask is whether aluminum and vinyl siding can be painted.

Fortunately, aluminum and vinyl siding can be painted very easily. What you need to do is to know the rules for painting aluminum and vinyl sidings. Mentioned below are some of the most important facts that you need to know when painting the aluminum and vinyl siding.

Surface Preparation:

A properly prepared surface greatly increases the success of any painting project, so as with painting aluminum and vinyl siding. You need to check to make sure that there are no underlying problems. Check whether the siding needs any repair or nailing of loose pieces. Remember, you can reveal a lot of decayed wood, insect damage, moisture etc. under the siding by performing a close inspection. It is important to address any structural problems before starting the paint job.

Priming Aluminum and Vinyl Siding:

Like any other painting, you also need to use primer on aluminum and vinyl siding. Priming is necessary when the siding is glossy and slick. You can also use primer on aluminum siding surface that is weather down to bare metal. Sometimes, the stains or discoloration on the aluminum or vinyl siding may bleed through the finish paint. Priming the siding is the ideal way to get rid of this situation. Priming the aluminum and vinyl surface wi9ll also help the paint job last longer.

Paints for Aluminum and Vinyl Siding:

Choosing the color for aluminum and vinyl siding is also an important task. When choosing colors for painting vinyl siding, you need to choose colors that are lighter than the color of the vinyl siding. Actually, if you use darker color to paint the vinyl surface, the color may cause the siding to warp.If possible, you can check the manufacturer of the vinyl siding in order to determine the perfect colors for the same. However, there is no such problem with using darker color for aluminum siding surfaces.

You just need to remember that the finish coat of paint that you use on aluminum siding surfaces should be acrylic exterior grade paint.

Staining is considered a difficult task since it is often hard to make the stain appear even and smooth. While staining, if the paint is applied unevenly, you can see the lap marks on the wood. Lap marks are actually the appearance or an increased gloss in which wet and dry layers

Working with Stain

Working with Stain

overlap during paint application.

What Causes lap mark?

Lap mark occurs as a result of failing to maintain a “wet edge” when applying the paint. It can also be caused due to the use of low class, economy paint. Both these situation may lead to the formation of lap marks on the wood when working with stain.

How to Prevent Lap Marks:

While doing the stain job, it is important to apply stain toward the unstained area and then back into the just-stained surface. This is technique is commonly known as brushing or rolling from “wet to dry” and this would produce a smooth and uniform appearance without lap marks.

Staining Wet-on-wet:

Another important rule of staining in order to prevent lap marks is to apply material wet-on-wet. You can do this on an interior wall by rolling a little section that allows you to overlap the edge with the next section prior to the first one manages to dry. In other words, you should not let a surface of stain dry before you blend it in with stain from another adjoining surface. This prevents creating two layers of paint as well as different color at the overlap and at the same time helps you avoid unattractive lap marks.

You can also work slowly and remove the paintbrush from the wooden deck gradually at the time when it runs out of stain. This is a great way to prevent lap marks. Furthermore, you can blend these marks by wiping out the stain from dark areas of the lap mark and by adding more stain to the light areas.

Remove the Lap Marks With Thinner:

In order to remove lap marks from a stained surface, you can soak a clean cloth in paint thinner and rub the cloth over the dark areas of the lap marks. As a result, the lap marks will slowly begin to disappear and remove some of the stain. However you need to be careful while doing this process since the soaked cloth may remove too much stain.

Another easy way to prevent lap marks while doing the stain job is to dip a cloth into the wood stain and rub it over the lighter areas on the lap mark.

A big question for the home owners is whether to use paint or solid color stain. There are notable differences between these two, and knowing Solid Color Stainthese differences will help you to make a right decision.

The difference between exterior paint and solid color stain can be defined in two ways – the appearance you want from the job and the formulation.

Sheen Availability of Paint or Stain:

Paint is available in many sheens, on the other hand solid color stain is only available in its own sheen. For using on most products, solid color stain will usually be close to a matte finish appearance. Another major difference between exterior paint and solid color stain is that stain is only meant for fresh wood that has not been painted earlier. On the other hand, paint can be used any types of wood as well as many other surfaces like plastic doors and stucco.

Stain is More Water Absorbent:

Water is mainly absorbed by the untreated wood that lies underneath the deck. Using stain on the deck is sensible since it lets the moisture escape from the wood through the coating. At the same time, it does not cause rotting by any trapped moisture.Solid color Stain is also made in such a way so that it can take foot traffic. Foot traffic actually results in more abrasion than the regular exterior paint is designed to take.

Paint Lasts Longer than Stain:

Another notable difference between solid color stain and paint is that paint will last longer than stain. However, stain could also be a good choice for the homeowners since it protects wood better by allowing the moisture to escape from the wood.

Benefits of Solid Color Stain:

Solid color stain is used for its many benefits. First, it lets moisture escape from the wood. Second, it is meant for abrasion from foot traffic. Stain is also self-adhering to wooden surface. Lastly, solid color stain prevents tannin oil from bleeding without a primer.

Benefits of Exterior Paint:

There are plenty of reasons why paint is used by most people. The first and foremost reason why paint is so popular is because it is available in many levels of sheen. Unlike slid color stain,paint works well on any surfaces including metal, plastic, stucco, and others. Paint also comes in high grade acrylic versions for offering superior longevity. Paint also comes in many varieties, therefore you can choose the brighter and more vibrant colors.

In the construction job, we are often faced with weather interruptions. Usually, two industries that are frequently hit the hardest by nature are roofing and painting. While roofing can still be done when the weather is really hot or extremely cold, painting is a project that requires a Painting Jobsatisfactory range of temperature for the best results.

Clarksville painters, one of the most reputed painting contractors in USA, recently conducted a study in the Mid-Atlantic region of US. The expert painting contractors of Clarksville painters found that at certain times of the year, it becomes really challenging for the painting contractors to paint the exterior of a house in Mid-Atlantic region of US. The temperature of swings of this region becomes the most important factor that creates difficulty to continue with the painting project. In fact when the weather conditions are taken into account, finding days with ideal painting conditions can really be difficult in Mid-Atlantic region.

Following are the challenges that the painting contractors face due to temperature swings in Mid-Atlantic region of US:

Hot Weather:

Temperature often becomes really hot it Mid-Atlantic region and this creates a big challenge for exterior painting. Hot weather actually increases the surface temperature of the whole house. As a result, it becomes really difficult for the paint to adhere to the siding or the trims. Furthermore, it is very common thing to see bubbles and blisters on the surface when it is too hot. As soon as the paint dries the bubbles and blisters on the surface starts to peel, this is really unsightly. Additionally, your home’s surface is not going to receive adequate protection from the paint.

Cold Weather:

Just as the hot weather, extremely cold weather also creates a big challenge for the painters. Cold weather actually causes the paint to absorb excess moisture. As a result, the additional moisture will prevent the paint from drying properly. This in turns will affect adhesion. If you apply paint on the surface in extremely cold weather, it is more likely to start to crack and chip off in no time. To get rid of this challenge, Clarksville painters often suggest using certain paints that are capable to withstand certain cold weather condition.

Humidity:

The Mid-Atlantic region of US is considered humid continental and the late winter climate and spring offers less humidity, which is a great time for exterior painting. However, in certain cases extreme humid weather conditions may create condensations on recently painted surfaces.

Licensed and insured – these are the most popularly used terms when it comes to choose a service provider or contractor. Painting contractor is no different. However, what’s the importance? Why do you need to care about finding a licensed and insured painting contractor? It’s important to understand how they help you and why hiring licensed and insured painting contractor is worth the money.

paintroller

Saves Your Pocket:

We need to admit that paining is a strenuous task that includes hazardous jobs like climbing ladders and dealing with solvents. If the painting contractor you hire here at Clarksville is not insured, you may end up paying out of your own pocket when the contractor becomes injured by any fatal accident. Even your homeowner’s policy could be insufficient to cover the bills in case if an accident occurs at your property. An insured painting company could be of the great help especially when your insurance costs increase or your insurance policy is cancelled by any chance.

Better Painting Quality:

Unlicensed painters could be synonymous to untrained painters who could actually ruin your house painting project. Untrained and unlicensed painters are not likely to meet the minimal guidelines required for a house painting project and they may provide you with a poor quality painting job. This could actually end up in spending more cashes to hire a trained painting contractor to complete the painting job. Professional licensed Clarksville painting contractors understand the importance of preparing interior or exterior surfaces prior to start the painting project. They also use the authentic tools and products for the painting job ensuring the longevity of your painting task.

Avoid Scams:

It is very common to hear about scams in the construction industry including painting industry. Hence, you should always avoid frequent calls from any unsolicited phone numbers regarding cheap painting services. These types of calls are usually made by unlicensed and uninsured painting contractors with no verified phone numbers and address. Hiring licensed and insured Clarksville painters eliminates the risk of getting abused by these sub-standard painting companies.

Regulated by Government Authority:

Hiring an unlicensed and uninsured painting contractor may end you up with little rework in case there is a dispute or work is substandard or incomplete. However, a licensed painting company is regulated by Government agency and therefore, they will return to fix the problems if needed. But the unlicensed and uninsured contractors don’t have ties to any Government authority.

Filling cracks and holes with caulk in your home’s window trim and siding before the painting not only makes the paint task look better, but also improves the quality of painting job. No matter in which surfaces they are, cracks and holes always tend to collect water, which exterior caulkingcauses the paint to peel.

What is Caulking and why it is important before painting?

Exterior caulking is actually a process to seal the joint between two surfaces as well as to fill the small holes. When you are thinking to take an exterior painting project, it is always necessary to use the top quality caulk so that it withstands extreme weather conditions and temperature changes. A good quality caulking job remains flexible for 30 to 50 years. Before caulking joints between two different surfaces, you need to make sure that the manufacturers and quality painting contractors recommends the caulk for both materials. When you will be painting your surfaces, make sure you paint the caulk as well. If you are in confusion whether a particular caulk is suitable for an application, you can contact the manufacture’s customer service associates for assistance.

What is the Best Time for Caulking?

The best time for caulking is the time when you just have finished the scrape, sand, and prime. Caulk adheres better when applied on the primed surfaces. It will be more effective when the gaps, cracks, and holes you want to fill are more evident. Caulking should be done in warm days when the air remains dry. Before a painting job, you need to scrape away any peeling adjacent to the caulked areas. While doing so, some of the bare wood may be exposed. In such cases, you need to re-caulk all surface areas as well as the cracks between any two nonmoving materials.

Caulking the Horizontal Joints:

You should never caulk the horizontal joints on siding where the siding courses overlap. The cracking that situates between two courses of siding provide ventilation points to let the moistures escape from the siding and from inside the wall.It is also useful to fix the small holes in the siding with an exterior caulking compound. Exterior patching compound is also available in a premixed dry powder form that you need to mix with the water. Exterior patches can also be used a way to fill the small holes. For better exterior caulking information you can contact to the professional painting contractors like Clarksville painters.

Tips for Surface Preparation Prior to Staining Interior Cedar Siding

Staining your interior cedar siding is an important project and the success and beauty of staining job depend on both the quality of the stain you use as well as proper cedar surface preparation. Just you should not wax a car without properly washing it, you cannot apply stain to Cedar Sidingyour interior cedar siding without preparing the surface.

As a homeowner, you might be busy in choosing the high quality stain product and color, yet give no or little importance on preparing the surface. However, the professional painting contractors would always suggest surface preparation prior to apply any stain. Proper surface preparation ensures a long lasting stain job and eliminates all types of problem that may arise during the paint job.Here are few tips that you should follow when preparing a cedar wood siding for staining.

Examine and Look for any Potential Defects:

You need to closely examine your siding to find any problem areas or an obvious construction defects. The surface of the cedar wood should be in good condition and the wood should not be eroding or decaying. Furthermore, you need to look for any surface contamination like mildew stains, dirt, and chalkiness. In case you find any problems, you need to remove all contaminations before applying the stain to the cedar wood siding. However, you should remember that there is not any ultimate cure for every surface problem. Hence, you should consult to professional painting contractors like Clarksville painters to get rid of any surface contamination.

Perform a Tape Test:

In order to make sure that the wood is ready to be stained, you need to perform a tape test. To do this, you can press a piece of tape firmly against the surface to be stained, and then tear it away to examine the back. If you find the presence of an old stain or loose wood fibers on the tape, it is sure that there is moisture problem. Excessive moisture in the cedar wood siding may cause serious problems like peeling, wood erosion, rot or decay. The wooden surface must be dry at the time of staining. Furthermore, the cedar surface should not even absorb r collect excessive moisture after staining.

Remove Mildew Stains and Dirt:

If the thought of unprepared surface before staining cedar siding is daunting you, choose a professional painting contractors like Clarksville painters for the most effective removal of mildew stains, dirt, soot, old stains, and other problems. The professional painting contractors typically use cleaning solution and thus they can provide you with a good staining job.

4 Important Tips to Consider Before Staining Exterior Cedar Siding

Visiting a paint store can be an overwhelming choice. The task of deciding on a particular paint or stain coating for your exterior cedar siding could be a daunting task, since there are many varieties. A set of useful tips is intended to prepare you, before you actually buying the stain coating for cedar siding.

These tips will help you to know exactly which type of stain coating fits your final outcome.Cedar Siding

Think About the Current Weather Condition:

When applying a stain coating to an exterior cedar siding, a quick glance at the latest weather forecast is a good idea. The humidity or moisture in the air may create a serious hazard to the cedar. Hence, you need to estimate your time to complete the paint or stain project by looking into the weather forecast.

Cleaning the Cedar:

Another important tips before staining the cedar siding is to decide if the cedar wood is new or old. There is a huge difference between the tasks of applying stain coatings over the new cedar and applying stain on older seasoned cedar. A brand new cedar siding requires installation and preparation so it accepts stain of any sort. Cleaning the cedar siding by power washing actually opens up the wood’s grain, allowing proper adhesion and saturation. You can add a good additive like TSP or Trisodium Phosphate. This type of chemical is popularly used as a cleaning agent, stain remover, and de-greaser. If the cedar is old, it may have black ugly mildew all over it. Cleaning an old cedar before staining is must.

Painting or Staining New Cedar:

When you have new cedar siding to be stained, you need to start from the scratch. The surface area should be cleaned and dried properly. Typically the brand new cedar siding that is freshly milled, could have a moisture content that creates disruption when attempting stain coatings on it. Hence, you have to check with your lumberyard about the date when it was cut and milled. Generally, the freshly cut cedar that is installed outside requires at least two weeks after installation to dry out completely and to apply stain coatings.

Staining Old Cedar:

Older and seasoned cedar siding is where your painting skills are properly matched. If a few steps are performed, staining an old cedar siding comes out almost flawlessly. You should always remove all old flaking paint or stains on the top layer of wood by using power washing. For more information about staining cedar siding, you can contact a good painting contractors like Clarksville Painters.