Applying a fresh coat of paint on the walls of your interior rooms is the best way to bring your living space back to life. However, when it comes to interior house painting, the most important way to achieve the perfect result is surface preparation. It is really important to make your ready before you dip your brush in a bucket of paint.

Mentioned below are the most important preparation steps you should take prior to interior painting.

Make Your Room Clear:

Before you apply a fresh coat of paint on the interior walls you should move out all furniture, chair, table, and wall art. It will be easier for the painter to apply paint on the interior walls if you can move items out. If there are any items that cannot be moved out, you can place them at the center of the room. For safety, you can cover these types of items with a plastic sheet. Keep all your paint tools at a corner from where it can be easily accessible.

Remove all Electrical Items:

It is important to remove all lights and electrical items and keep them inside a container for easy replacement once the paint job is done. Also, you can mask the plugs, switches, etc with masking tape to protect them from spilling paint.

Clean the Surfaces:

The most important rule of interior painting is to clean the surface. Before you apply the first coat, the surface needs to be properly cleaned. Also, it is important to allow the surface to dry properly. Wipe out the walls with a damp cloth and clean the cobwebs from the corners of the room. You can use a mild detergent powder to wash any mold and mildew from the surface. If there are stubborn mildew and grease on the surface, you can use a solution and warm water. Once done, you should not forget to clean the surface with normal water to remove any residue and allow it to dry properly.

Repair the Imperfections on the Surface:

It is important to repair all types of imperfections like the nail holes and cracks before painting the surface. You should fill all the crack and holes with spackle. If there are deeper gouges and imperfections, you need to use a spackling solution and sand it properly once done. Check for manufacturer’s instruction and allow it to dry. Use light sandpaper to smoothen the surface.

There are the times when you may want to paint your house’s exterior bare bricks. The exterior bricks have become weathered or stained over time and it is really important to apply a fresh coat of paint on the brick walls. Although painting bricks are not always advisable because the bricks are porous in nature and it is really difficult to apply paint on it. However, with modern printing technology and good quality paint, it has become very easier to paint your exterior bricks.

If you are planning to paint your brick walls, make sure you fix all the damages and cracks that are often caused due to the harsh weather condition. Also, you can keep the following things in mind when applying paint on the exterior bricks.

Clean Your Exterior Bricks:

The simplest way to clean the dirt and debris of your exterior bricks is to go for a pressure washing. However, you should use too much pressure as the extra pressure may damage the mortar. However, you can use soap or mild detergent powder if your bricks have more mildew and debris. The reason for cleaning your exterior brick walls before painting is to clear all types of dirt, grease, and loose paint.

Fix All Damages:

The next step is to fix all damages that your brick walls might have. It is important to remove all loose paint, otherwise, it is going to create a huge problem when you apply a fresh coat of paint. You can use a hard scraper if your bricks have more loose paint. However, you should never use a wire brush.

Prime the Exterior Bricks:

Another important thing is to sand the brick walls to make it smooth using a circular sander. Always use a high-quality primer for applying on the exterior brick. It is important to prime all mortars and you should especially prime those places where mildew occurred first. If required give a couple of extra coat in such places in your brick walls. Always use good quality acrylic primer and give proper time to dry the primer completely.

Apply paint on the Exterior Bricks:

Once the above-mentioned steps are done, you need to choose a good quality exterior house paint and apply at least two coats in order to achieve the best results. Just like any other walls, you should brush and roll the bricks to make sure that the paints can reach to every nook and cranny of the brick wall.

The finish of your paint can have a huge impact on the way the paint color appears when it is applied on the surface. Also, the finish of your paint determines the durability of your paint. There are many different types of paint finishes like a flat, matte, egg-shell, satin, etc. Actually gloss and sheen create the main difference between these types of paint. Flat and matte finishes have no or minimum gloss and as a result, these two types of paints are often used interchangeably. However, as their name implies, there are some basic differences between flat and matte paint finishes.

Matte Paint Finishes:

According to the paint experts, a matte finish can be termed as velvet finish. Matte paint usually has very low-gloss, but it has more shine than a flat paint finish. As these types of paints have a low-gloss, they are the best to cover the imperfections of your wall. This is because these paints absorb light rather than reflecting. As these types of paints have the most pigments, they offer the best coverage rather than the flat paint.

Flat Paint Finishes:

According to the paint manufacturers and paint contractors, flat paint has no shine at all. This means flat paint is unable to reflect even a little amount of light. As a result, flat paint too can be a great choice for hiding imperfections and irregularities on the walls, ceilings, or other surfaces. Also, it is easier to add touchup coats to the flat paint finishes because this type of paint finish blends better than the paint finishes with high gloss. Also, most of the flat paints that are available nowadays are easily washable and can hold up to mild cleaning.

Because of their nature, flat and matte paint finishes are ideal for use in ceilings and walls. Also, both these paint types are ideal to use in a room that received low traffic, but you should not use it in places like a kid’s room, kitchens, bathrooms, etc.

However, this is true that there is actually no standard industry rule to define the uniformity of paint finishes. As a result, a paint finish type that one paint manufacturer defines as ‘flat’ may be similar to the one that another company calls ‘matte’. The best way to determine which paint type would the best between flat and matte paint, you should purchase a sample first and then test it on the surface on which you want to apply the paint.

When choosing the paint colors for your interior rooms, you have to keep the natural and artificial lights of your room in your mind. This is because the natural and artificial paint color of your room can actually affect the way how your paint color looks.

The natural sunlight changes throughout the day and the amount of natural light your room receives actually depends on its location. On the other hand, artificial light changes when you choose a different type of bulb in your room. All these lights can directly affect the paint color that you are going to apply on the interior walls in your room. Therefore, before you actually choose a particular paint color for your room, it is important to understand how different lighting affects the interior paint colors.

Effect of Sunlight on Interior Paint Colors:

You may experience slight changes in the interior paint color depending on the amount and angle of sunlight the room receives. It is important to consider sunlight when choosing a paint color for your home. If you have an interior wall that is facing the North, you may receive Sunlight which is cool and slightly bluish.

Therefore, it is important to choose a bolder color in North Facing rooms, because the bolder color will look better than the lighter colors. On the other hand, you will get a lot of skylights if you have a South facing the room. This type of Sunlight brings the best out of cool and warm colors. East facing rooms may experience a yellowish light before noon, which turns blue later the day. These types of rooms are best to use reds and warm colors.

Effect of Artificial Light on Interior Paint Colors:

The type of artificial light you use in your room can actually make a difference as to how your color alters. For example, the warm yellow light of incandescent bulbs can turn your red interior walls more vivid. Also, these types of light can completely mute colors like blues and greens. Also, fluorescent bulbs are flat and cool and can enrich paint colors like blue and green. On the other hand, CFL lights can produce plain white light, which is good for all types of paint color.

Effect of LEDs on Interior Paint Colors:

LED lights are widely popular nowadays as you can control its light color by using wireless remotes. These types of a bulb can give your interior paint color and warmer or cooler look.

When it comes to applying a fresh coat of paint on the surface of your house, the ceiling of your room is the most overlooked part. However, the reality is you cannot avoid the ceiling forever. At some point, the old, cobwebby ceiling needs a fresh coat of paint. There are many different choices when it comes to selecting the best paint color for your ceiling. However, the confusing part is to decide which paint color will give you the high quality, professional looking ceiling of your dreams.

Before you choose the right paint for your ceiling, there are many different things that you need to consider. For example, it is important to consider the condition of your old ceiling, the material that was used to cover the ceiling, and your room’s décor. Depending on the current situation of the ceiling of your room, you should choose the paint type.

What Paint Type Should I choose for Ceiling?

In most cases, homeowners go for the flat paint when it comes to choosing the best paint for the ceiling of their room. Even the professional painters prefer to use flat paint for the ceiling because it hides all types of imperfections. Unlike gloss paint, flat or matte paint finish is not going to reflect glare from lights. Another reason why most people choose flat paint for their ceilings is that flat paint is water resistant and as a result, they are the best choice for bathroom and kitchen ceilings.

Why Flat Paint is good for Ceiling?

Actually, paint that is made for ceilings are a bit thicker than the ordinary wall paints as a result only one coat will be enough for the ceiling. Also, nowadays there are many different paint manufacturers that make flat paints especially for ceilings – it is always beneficial to use these types of paint. Also, low and non-VOC paints are now made with the one-coat coverage feature so you can use these types of thicker paint for your ceilings. Flat paints that are specially made for ceilings are designed to provide a uniform surface so that it can hide the imperfections like stains and spots and give your ceiling a clean finish. It is good to use white on your ceiling as it brightens up the room. However, nowadays paint manufacturers are offering many neutral paint colors for the ceiling, you can choose anyone from them.

Another reason why flat paint is good for a ceiling is that it is durable enough to resist peeling and cracking which is very common with an old ceiling.

When you are planning to apply a fresh coat of paint on the surface of your house interiors or exteriors, you will get so many brands and lines to use. No matter if you are planning to do your own house painting or thinking to hire a professional painting contractor, it is important to educate yourself on the difference between low-quality cheap paint and high-quality paint. The fact is, choosing cheap paints over high-quality paints will actually lead to more time, poor result, and more cost in the long run. This is the reason why you should not consider using cheap paint.

Mentioned below are the reasons why cheap paints actually cost more:

Better Pigments:

If you use high-quality paint, you get better pigments. Most of the high-quality paints contain expensive pigment like titanium dioxide, which is a pure white powder that hides the imperfections of a surface very well. However, the cheap paints have low-quality pigments silica and clay which cannot hide the imperfections of the surface. As a result, you need more coats to hide the old paint and other imperfections.

High-Quality Binders:

High-quality paints also contain better resins or binders which allows the paint to stick better on the surface. As a result, the paint becomes more durable and lasts long. Unlike the cheap paints, high-quality paint penetrates more which is important when you are applying the paint on wood surfaces.

Less Water and Fewer Solvents:

High-quality premium paints have fewer solvents per liter versus low-quality cheap paint. Fewer solvents mean less water in the paint which magnificently affect the look and feel of the painted surface.

Cheap Paint Requires More Coats:

Low-quality cheap paints have more solvents and low-quality resins, as a result, they do not stick well to the surface. You need to apply at least two to three coats of paint, which requires more time and labor cost. You should be aware of the paint contractors that offer very low painting price, as this type of quote obviously comes with cheap paint, which ultimately ends up costing you more money in the long run.

In some cases, high-quality paint comes with primers and doesn’t require additional priming. Also, some of the premium paints contain additives that reduce mildew. This saves an entire step and you can save money by using high-quality paints.

Painting your home is a huge expense, but you should never make a mistake of selecting a paint contractor based only on money. If you are too much concerned about saving money, you might end up selecting an unlicensed, unprofessional, and inexperienced painter that will end up costing you more money.

There are many different things that you need to consider when selecting a painting contractor. For example, you should ask the painter about their insurance policy, license, and even about the materials that they are going to use in your paint project. The main reason behind this is to judge the quality of the painting contractor. However, the best thing to judge the quality of a painting contractor is to check the references.

Importance of Checking References:

Checking painting contractor references is very important as they give you a genuine idea as to how the painter deals with their customers. The golden rule is to check at least 5 references before hiring a professional painter. You need to ask the painting contractor to provide you with at least 3-5 references of paint projects they completed in the past six months. If they cannot provide you with the same, you should not hire them as your house painter.

How to Check the References?

Once you receive references from the painting contractor, make sure you call them and ask some basic questions. It is Important to ask them some basic questions about the quality of the paintwork and how satisfied they are with that particular painting contractor. If they are satisfied with the painting contractor, this is a good proof that the painting contractor offers the best quality of services to their customers. Make sure you call at least 5 references and ask questions like whether they enjoyed working with the painter, or if they were comfortable leaving them in their house, whether the staffs were friendly, etc. Apart from the physical references, you can also go and check what the customers are saying about the painting contractors in different review sites such as Yelp.

This is not going to be a waste of time to check references you got from the painting contractor, especially when you ask the proper questions. It is important to make a short list of right questions before you make the call and make sure the references that you are given with had hired the painting contractor for the similar type of paint job like yours.

When you first think of applying a fresh coat of paint in the exterior of your house, you have a simple list to follow – go to the paint store, buy the paint, hire the painting contractor, and paint the house. However, once you enter the paint store and start looking around, you will feel amazed to see a lot of different kinds of paints.

Given the fact that your home has a lot of different surfaces, you will need to choose the correct paint sheen in order to get the perfect result. If you want to receive a distinctive result and a wonderful exterior surface, you should have a clear idea as to which paint sheen works the best on which surface. Mentioned below are the differences between Satin and gloss exterior paint sheens.

Exterior Satin Finish:

Exterior satin finish contains a bit of shine, which makes them easier to clean. However, these types of paint sheen have enough flat properties to help you mask surface imperfections. Because of their versatility, the satin sheen is being used by many homeowners. These types of sheets can be appropriately used on many types of exterior wall materials as well as other accented areas. For example, the satin sheen is the best to apply on window trim, shutter, frames, and any other smaller surfaces that require regular cleaning.

Exterior Gloss Paint:

Exterior paint with a gloss finish is really unique as they stand out in the crowd. Paint with gloss or semi-gloss is perfect for accent surfaces that receive a good repair. High gloss paint is also the best choice for surfaces that may require a lot of cleaning. Comparing to the semi-gloss paint, paint with high gloss finish provides a harder and shinier surface. This is really good for surfaces as long as they are smooth and have no imperfections. When it comes to applying high gloss paint in the exterior surfaces, you need to decide how much attention you need to bring to the painted areas. This is because high gloss paint sheens will surely get the attention of people.

In comparison to the high gloss paint, satin paint finishes are relatively low in reflection. Because of this nature, satin paint does a good job in hiding imperfections in your exterior surfaces. On the other hand, high gloss paint is more durable and they will hold up well on the exterior surfaces. It is logical to use high gloss paint for the surfaces that need to be washed frequently.

When it comes to signing a deal with a painting contractor, the first thing that should come in your mind is to get a warranty. In most cases, the paint warranty comes with various aspects and conditions about the labor and materials. In a typical house painting project, no matter whether it is exterior or interior, 8 out of 10 of the cost relates to the labor, while about 20% of the cost relates to the materials. Mentioned below are the reasons why you should ask the painting contractor to provide you with a warranty.

Warranty Protects You Against Common Defects:

In most cases, the warranties offered by the painting contractors protect homeowners against common paint defects like minor cracking, bubbling, peeling, etc. Also, the paint warrant protects house owners against other paint defects like non-uniform fading within a very short period of time once the paint job is done. Some of the painting contractors also offer extended paint warranty, which significantly longer than the standard warranties. This type of warranty can help you save money and time in the long run.

Labor Warranty Vs. Material Warranty:

As mentioned earlier, labor cost contributes most of the overall paint project cost. For this reason, many homeowners put the focus on getting a warranty that offers labor coverage. However, it is always better to go for a painting contractor that offers a warranty that covers both labor and materials. This helps you a lot because if. For example, the paint starts to peel three months after the completion of a paint job, you must be able to contact your painting contractor and let them handle the entire issue. Now in case, the painting contractor reaches back to the paint supplier in order to solve your issue, the same should be included in the paint warranty.

Ensures that The Paint Lasts Long:

If the fading is not an issue for you, the warranty also covers the fading issue, only if the circumstances are perfect. Fading is a common problem among people with a large family because they expect the paint to tolerate a lot of rough treatment while their kids are still at their home. However, in such cases, your paint may start to fade because of external issues. Otherwise, the paint may last up to 35 years.

The paint warranty is always important because in most of the cases the paint job fails because of poor workmanship. It is a responsibility of you to ask the paint contractor to provide you with a minimum of 2 years paint warranty.

When it comes to making your home the most beautiful place in the globe, you need to hire the best professional painters. The professional painters need to come in and apply a fresh coat of paint color that makes your home look its best. The only thing that you need to take care of is to do your own research to make sure that you are hiring the best painter in your area. While checking the customer testimonials and the local reputation of the painting contractor is a must, you should also consider asking the painting professional to provide you with a detailed quote. A detailed quote can be the most important factor to choose a contractor for many different reasons. Mentioned below are the reasons why it is important to get a detailed quote for your painting project.

Make Sure You Get The Best Price:

The most important benefit of having a detailed quote in hand is that it provides you with an overall idea as to how much money you need to spend on the painting project. Getting an overall idea of the total cost can help you compare the prices with other painting contractors in your area. While most of the professional painting contractors will try to give you the best price to stay tuned in the competition, you may find out that some of them are underpriced or slightly overpriced. This will help you to figure out an initial list from which you can select one.

Look for Any Hidden Charges:

Getting a detailed quote beforehand will help you understand whether there are any hidden costs. For example, if a company is providing you a much-underpriced quote, this is probably because there is a whole series of fees and other hidden charges that you need to pay as the project goes on. On the hand, there will be other professional painters who will be very honest to mention all the extra charges within the quote beforehand so that you can have a clear idea about what you are paying for.

Make Your Budget:

Once you have a detailed quote, you can easily budget for it. This means you will be able to look at the total costs and make sure you are going to pay anything extra. Having the quote up front allows you to know how much exactly you have to pay. Budgeting also allows you to enjoy the painting experience more as you won’t need to worry about the cost any more as you already have a clear idea as to what you need to pay.

12345...