The task of removing wallpaper can be a pain but you can make it easier on yourself with the right equipment and approach.

Ready the Space:

Before you start removing the wallpaper, you should remove all curtains or drapes and outlet covers and switch plates. When doing the same,wallpaper removal solution it is important to position your drop cloth beneath the first wall to be sprayed. Also, switch off the power supply at the breaker and fuse box.

Use Chemicals:

You can use a chemical stripper designed for texture coating to remove wallpaper that’s been covered with paint. However, you need to wear protective gloves and goggles when applying the chemical on the wallpaper. Another important way to remove old wallpaper is to use fabric softener. The task of removing wallpaper becomes easier with fabric softener. For the best result, stir 1 cap-full fabric softener into 1 litter water and sponge the solution onto the wallpaper. Let the wallpaper soak in for 30 minutes and then scrape the paper from the wall. In case the wallpaper has a water-resistant coating, you can score it with a hard wire brush before applying the fabric softener liquid.

Consider Using a Try Steaming:

It is also an important idea to use steam wallpaper stripper to handle materials that are very difficult to remove. Steam wallpaper stripper is also useful if the wall is covered with layers of old paper. This can make your job easier. You can also score the wallpaper a little as per the instructions on your wallpaper scorer. Scoring is a great process that helps the steam penetrates. However, there are some people that want to skip the scoring process since it can create small holes in the paper on the drywall, but if you have a good plaster wall, this is not going to create much an issue. This type of steaming method is really ideal for wallpaper that proves difficult to remove.

Strip The Wallpaper:

Another great idea is to strip the wallpaper by using a help of a plastic putty knife and peel pieces of wallpaper away one at a time. It is important to peel the wallpaper upwards since this will make it easier to wedge the putty knife between the uplifted paper as well as the wall.

Clean Up the Residue:

Once done, you need to wash away all residues and clean the same with soap and hot water. Rinse the residues and then dry with a clean towel or rag. After that, you should lightly spray the walls one final time by using clean water for getting the best result.

Even though you live in a place that is blessed with one of the best climates in the country, it is still problematic to paint the exterior of your house in winter. Since the weather becomes more and more uncertain from day to day during the winter, a question naturally comes in mind, ideal temperature for exterior painting“how cold is too cold to paint your exterior?”

It is always important to do your own research depending on how difficult the exterior paint job is, what type of paint you are using, and various other factors that are directly related to the exterior paint job.

Don’t Rush With The Painting Project:

You should be careful not to let your painting contractors rush with your exterior painting project. It is recommended to hire a good painting contractor whom you can trust. It is also important to pressure wash your home prior to apply paint on the exterior surfaces. You should also allow the exterior surfaces to properly dry before caulk and paint are applied. If you have more amount of shade surrounding your home, it may need an extra day to dry.

What is the Ideal Temperature for Exterior Painting?

There are many different paint manufacturers who set minimum temperature application on their labels. There are some paint manufacturers who say that you can paint as cold as 35 degrees. However, the ideal temperature for painting your exterior walls is no less than 40-45 degrees. This is even stipulated on that temperature staying at that level for 5 hours or more consistently. It is also important to provide the paint with a surface temperature to enable it to cure properly. If there is a forecast of raining, you need to make sure to stop the paint job in case there is not enough time to allow each coat to dry at least four to five hours. In case you want a much deeper color change, apply two coats of paint, and give longer time to allow for the added tint in the paint.

Think Twice Before Proceeding:

When it comes to paint the exterior surfaces of your house with surface temperature of below 40 degree, it is good to think twice about having that project started. It may be better to wait with your painting project, if you find that the temperature is going to be fluctuating in the below 40-degree mark for a couple of weeks, and not much sunlight through.

Staining is considered a difficult task since it is often hard to make the stain appear even and smooth. While staining, if the paint is applied unevenly, you can see the lap marks on the wood. Lap marks are actually the appearance or an increased gloss in which wet and dry layers

Working with Stain

Working with Stain

overlap during paint application.

What Causes lap mark?

Lap mark occurs as a result of failing to maintain a “wet edge” when applying the paint. It can also be caused due to the use of low class, economy paint. Both these situation may lead to the formation of lap marks on the wood when working with stain.

How to Prevent Lap Marks:

While doing the stain job, it is important to apply stain toward the unstained area and then back into the just-stained surface. This is technique is commonly known as brushing or rolling from “wet to dry” and this would produce a smooth and uniform appearance without lap marks.

Staining Wet-on-wet:

Another important rule of staining in order to prevent lap marks is to apply material wet-on-wet. You can do this on an interior wall by rolling a little section that allows you to overlap the edge with the next section prior to the first one manages to dry. In other words, you should not let a surface of stain dry before you blend it in with stain from another adjoining surface. This prevents creating two layers of paint as well as different color at the overlap and at the same time helps you avoid unattractive lap marks.

You can also work slowly and remove the paintbrush from the wooden deck gradually at the time when it runs out of stain. This is a great way to prevent lap marks. Furthermore, you can blend these marks by wiping out the stain from dark areas of the lap mark and by adding more stain to the light areas.

Remove the Lap Marks With Thinner:

In order to remove lap marks from a stained surface, you can soak a clean cloth in paint thinner and rub the cloth over the dark areas of the lap marks. As a result, the lap marks will slowly begin to disappear and remove some of the stain. However you need to be careful while doing this process since the soaked cloth may remove too much stain.

Another easy way to prevent lap marks while doing the stain job is to dip a cloth into the wood stain and rub it over the lighter areas on the lap mark.

Technology can help us immensely with keeping our homes up to date. Many of us have smart phones and those that don’t still have access to internet resources. The applications below ten years ago would cost us lots of time and money, now the three apps below are available at the click of a button.

1. ColorSnap – This Sherwin Williams app is great for comparing different colors. You can use the photos already in the app and try out different colors. You can also upload your own personal photos.

2. HomesAvvy – This app is a must for any homeowner. This app lets you set up a home maintenance plan, then sends you alerts each time a task needs to be completed. Things such as changing HVAC filters, changing batteries in smoke detectors, or when you need to have your gutters cleaned.

3. Remodelista – Gives you great ideas for every room in your home. There are lots of photos and descriptions to help you.