Applying a fresh coat of paint on the walls of your interior rooms is the best way to bring your living space back to life. However, when it comes to interior house painting, the most important way to achieve the perfect result is surface preparation. It is really important to make your ready before you dip your brush in a bucket of paint.

Mentioned below are the most important preparation steps you should take prior to interior painting.

Make Your Room Clear:

Before you apply a fresh coat of paint on the interior walls you should move out all furniture, chair, table, and wall art. It will be easier for the painter to apply paint on the interior walls if you can move items out. If there are any items that cannot be moved out, you can place them at the center of the room. For safety, you can cover these types of items with a plastic sheet. Keep all your paint tools at a corner from where it can be easily accessible.

Remove all Electrical Items:

It is important to remove all lights and electrical items and keep them inside a container for easy replacement once the paint job is done. Also, you can mask the plugs, switches, etc with masking tape to protect them from spilling paint.

Clean the Surfaces:

The most important rule of interior painting is to clean the surface. Before you apply the first coat, the surface needs to be properly cleaned. Also, it is important to allow the surface to dry properly. Wipe out the walls with a damp cloth and clean the cobwebs from the corners of the room. You can use a mild detergent powder to wash any mold and mildew from the surface. If there are stubborn mildew and grease on the surface, you can use a solution and warm water. Once done, you should not forget to clean the surface with normal water to remove any residue and allow it to dry properly.

Repair the Imperfections on the Surface:

It is important to repair all types of imperfections like the nail holes and cracks before painting the surface. You should fill all the crack and holes with spackle. If there are deeper gouges and imperfections, you need to use a spackling solution and sand it properly once done. Check for manufacturer’s instruction and allow it to dry. Use light sandpaper to smoothen the surface.