Tips for Surface Preparation Prior to Staining Interior Cedar Siding

Staining your interior cedar siding is an important project and the success and beauty of staining job depend on both the quality of the stain you use as well as proper cedar surface preparation. Just you should not wax a car without properly washing it, you cannot apply stain to Cedar Sidingyour interior cedar siding without preparing the surface.

As a homeowner, you might be busy in choosing the high quality stain product and color, yet give no or little importance on preparing the surface. However, the professional painting contractors would always suggest surface preparation prior to apply any stain. Proper surface preparation ensures a long lasting stain job and eliminates all types of problem that may arise during the paint job.Here are few tips that you should follow when preparing a cedar wood siding for staining.

Examine and Look for any Potential Defects:

You need to closely examine your siding to find any problem areas or an obvious construction defects. The surface of the cedar wood should be in good condition and the wood should not be eroding or decaying. Furthermore, you need to look for any surface contamination like mildew stains, dirt, and chalkiness. In case you find any problems, you need to remove all contaminations before applying the stain to the cedar wood siding. However, you should remember that there is not any ultimate cure for every surface problem. Hence, you should consult to professional painting contractors like Clarksville painters to get rid of any surface contamination.

Perform a Tape Test:

In order to make sure that the wood is ready to be stained, you need to perform a tape test. To do this, you can press a piece of tape firmly against the surface to be stained, and then tear it away to examine the back. If you find the presence of an old stain or loose wood fibers on the tape, it is sure that there is moisture problem. Excessive moisture in the cedar wood siding may cause serious problems like peeling, wood erosion, rot or decay. The wooden surface must be dry at the time of staining. Furthermore, the cedar surface should not even absorb r collect excessive moisture after staining.

Remove Mildew Stains and Dirt:

If the thought of unprepared surface before staining cedar siding is daunting you, choose a professional painting contractors like Clarksville painters for the most effective removal of mildew stains, dirt, soot, old stains, and other problems. The professional painting contractors typically use cleaning solution and thus they can provide you with a good staining job.